Midi Heki FL (former "Style"), anthracite, with lever and forced ventilation
New name with unchanged high quality!
The combination of high-quality, robust materials with comprehensive equipment and ease of use.
The MIDI HEKI FL 700 x 500 roof light for 30-34 mm* roof thickness from Dometic!
This roof light with its elegant, aerodynamically designed roof dome and concealed outer frame not only reduces driving noise by up to 20% (3 dB), but also provides more safety and mechanical stability with the integral hinge and locking feature.
The opening of the roof light, which is equipped with a double acrylic glazing, is carried out by lever operation with an opening angle of up to 45º and can be opened in 3 positions: fully open, half open and bad weather position. The insect screen and blackout blinds built into the designer inner frame can be individually adjusted.
* Mounting sets are also for other roof thicknesses available. See "Good to know!"
Good to know!
The MIDI HEKI FL (STYLE) 700 x 500 in anthracite is alternatively available in the following versions:
- With handle, but without forced ventilation, or
- With crank and with forced ventilation, as well
- With crank, but without forced ventilation
Alternatively, the above versions are also available in the color white.
A mounting kit for a roof thickness of 30-34 mm is included as standard. In addition, mounting kits are also available for the following roof thicknesses:
25-29 mm, 35-42 mm, 43-52 mm or 53-60 mm
If one of the assembly kits listed above is required, it must be purchased separately (optional). In such a case, however, it is not possible to offset against the standard installation kit included.
The design of the MIDI HEKI FL (STYLE) is suitable for vehicles that normally do not exceed a speed of 160 km/h (93 mph). Excessive wind resistance due to excessive speed can lead to damage to the roof window, which in turn can result in the loss of any warranty claims.
To reduce noise caused by wind resistance while driving, the roof window can also (optionally) be fitted with a suitable spoiler from Dometic:
Spoiler 570 mm for lengthways or Spoiler 800 mm for roof windows installed transversely to the direction of travel.
Vehicles based on Fiat Ducato, Peugeot Boxer or Citroen Jumper require an adapter frame for a trapezoidal sheet metal roof for installation. These are available in two versions:
Front position ending with the roof edge, as well as Individual position for placement on the rest of the vehicle roof.
Scope of delivery
In the delivery are included:
- 1x Outer frame with glass dome
- 1x Inner frame including fly screen & blackout blind
- 10x fastening screw Ø 4 mm
- 20x fastening screw Ø 3,5 mm
- 10x mounting bracket (standard for roof thickness 30-34 mm)
- 1x hexagon bolt 68 mm, and
- a mulit-lingual installation and operating manual
Other accessory, such as sealant or adapter frame, is not part of the scope of delivery!
Shipping information
The roof window is shipped in a padded, stable cardboard box. For insurance reasons, a roof window is always shipped as a single item.
A film is applied at the factory to protect the acrylic glass. Due to previous storage, the roof window may show slight traces of dust.
