4x ALCAR 4012 – 15-inch steel wheel set for suitable Light chassis
This set consists of four silver ALCAR 4012 steel wheels for suitable commercial vehicles, campervans and motorhomes with 15-inch Light chassis wheel fitment. As ECE-approved replacement wheels, they are intended for the vehicle versions and wheel and tyre combinations expressly specified in the approval documents.
Each wheel measures 6 J × 15 H2, with an offset of 68 mm, a bolt pattern of 5 × 118 mm and a centre bore of 71.1 mm. The maximum permissible wheel load is 1,120 kg per wheel at a rolling circumference of up to 2,126 mm.
Which vehicles is the ALCAR 4012 wheel set suitable for?
The current ECE approval specifies applications for certain versions of the Fiat Ducato, Citroën Jumper and Peugeot Boxer, as well as other expressly listed vehicle types. Older vehicle generations are also covered, including Fiat Ducato types 230 and 244.
This wheel set is particularly relevant for vehicles originally equipped with a corresponding 15-inch wheel and tyre combination and Light chassis wheel fitment. However, the designation Light alone is not sufficient to establish compatibility.
The vehicle types, type-approval numbers, permitted tyre sizes and additional conditions specified in the applicable ECE approval documents must always be observed. Not every version of a listed vehicle model is automatically approved.
15-inch or 16-inch wheels – what should I check?
Different wheel sizes have been used on the Fiat Ducato, Peugeot Boxer and Citroën Jumper, depending on the vehicle generation and version. In particular, 15-inch wheels are common on older Light chassis vehicles. Other vehicle versions are equipped with 16-inch wheels.
Important: The existing wheel size alone does not determine whether replacement wheels are permitted. Before purchasing, check the actual wheel fastening configuration, the approved wheel and tyre combination and the information in the vehicle documents. The ALCAR 4012 has a bolt pattern of 5 × 118 mm and must not be confused with steel wheels designed for different wheel mounting configurations.
ECE approval – important for commercial vehicles and motorhomes
The ALCAR 4012 steel wheels have approval under UN Regulation No. 124, with approval marking E1 124R-000301. The available approval documents are identified as E1*124R00/03*0301*02, Corr. 01, dated 28 February 2025. They contain the updated vehicle applications for wheel type 60155118-02 and wheel version 00-4012.
These steel wheels are approved replacement wheels. The approval specifies which vehicles may use them and under what conditions. There is no general approval for all vehicles with a 5 × 118 mm bolt pattern.
Important: The maximum wheel load of 1,120 kg per wheel is a technical limit. Whether the wheel set is suitable for a particular vehicle also depends on the actual axle loads, intended tyres and vehicle-specific approval conditions.
Why might my motorhome's type-approval number be different?
Many motorhomes are manufactured under a multi-stage type-approval process. For example, Fiat, Peugeot or Citroën supplies the base vehicle, while the motorhome manufacturer completes the body construction or conversion. The completed motorhome may therefore receive its own EU type approval, which differs from the original approval of the base vehicle.
As a result, the approval number entered in field K of a German vehicle registration certificate (Zulassungsbescheinigung Teil I) may differ from the number specified for the base vehicle in the ALCAR approval documents. This difference does not necessarily mean that the wheels are unsuitable.
However, whether the wheels may actually be used on the completed motorhome must be assessed against the complete vehicle documentation and all applicable approval conditions.
Where can I find the approval details of the base vehicle?
An important source of information is the Certificate of Conformity (CoC). For motorhomes approved in several stages, the CoC documents for the base vehicle and the completed motorhome may contain different type-approval numbers.
Important: Even if the base vehicle's type-approval number matches an entry in the wheel approval documents, this does not automatically establish approval for the completed motorhome. The permissible axle loads, vehicle configuration, wheel and tyre combination and all applicable conditions must also be considered.
What should I do if my motorhome cannot be clearly identified?
If your motorhome's type-approval number differs from the information in the approved vehicle applications, or if the vehicle cannot be clearly identified, we recommend consulting an authorised vehicle inspection organisation before purchasing.
Where possible, have your vehicle registration certificate, available CoC documents and the relevant ALCAR ECE approval documents ready. Depending on the vehicle and its approval status, an additional technical assessment or modification inspection may be required. The ALCAR approval documents are available under the "PDF" tab on this product page.
Installation and wheel fastening
For the ALCAR 4012, the wheel fastening components specified by the vehicle manufacturer for steel wheels must be used. For the corresponding vehicle versions covered by the documented applications, M14 × 1.5 conical-seat wheel bolts are specified.
Important: The required tightening torque must be taken from the operating manual of the respective vehicle. Use a suitable, calibrated torque wrench and observe all vehicle-specific installation instructions.
Before installation, the approval conditions and the necessary clearance from brake and suspension components must be checked. Required vehicle systems, such as an existing tyre pressure monitoring system, must remain functional after changing the wheels.
Installation should be carried out by a qualified workshop. After driving 50 km, the wheel fastenings must be retightened to the specified torque.
Good to know – is this steel wheel set suitable for your vehicle?
The ALCAR 4012 wheel set consists of four 15-inch steel wheels with Light chassis wheel fitment and a bolt pattern of 5 × 118 mm. Whether they are suitable and approved for your vehicle depends on the actual vehicle version and the applicable approval documents.
Further information on the differences between Light and Heavy/Maxi chassis and how to check vehicle approval can be found in our guide in the parent category "Wheels".