Dometic PERFECTCHARGE MCA 1235, 12 V, 35 A

IU0U battery charger for the simultaneous charging of two board and one starter battery

With its three battery outlets the Dometic PERFECTCHARGE MCA 1235 can charge two 12V board and one starter battery at the same time. And with input voltages from 110 V to 230 V it can be used anywhere in the world and continues to charge even when the input voltage drops. In addition, with the integrated multi-level charging technology, this device provides your batteries very gently. In sleep mode, the device provides noiseless charging at half power, making it ideal for the night or on electrically poorly secured parking spaces.

Possible damage to the device or the batteries prevents the integrated protection in case of short circuit, overvoltage or overheating. In its compact and lightweight design, it is easy to assemble and can be smoothly integrated into existing CAN bus systems via an existing interface. In addition, it is compatible with the optional Dometic MPC 01 battery controller, so you can manage the power perfectly.

In addition to the optional device extension with the MPC 01 battery controller, the device can also be extended with a remote control, a temperature sensor or the battery sensor from HELLA if required.

Scope of delivery

In the delivery are included

the battery charger
a 230-V connecting cable, and
a multi-lingual installation and operating manual

Other accessories, like mounting material or similar, is not part of the delivery!

Product safety information

Manufacturer information:

Dometic Germany GmbH
Hollefeldstr. 63
Nordrhein-Westfalen
Emsdetten, Deutschland, 48282
info@dometic-waeco.de
https://www.dometic.com/

Item information	Value
Shipping weight:	3,10 kg
Item weight:	1,90 kg

Suitable battery types:	Lead-acid, gel, AGM and Li-Ion
Heat dissipation:	With fan
Charge mode:	5-level
Maximum ambient temperature:	-20 °C to +50 °C
Storage temperature:	-40 °C to +85 °C
Air humidity:	20 to 90 %
Temperature coefficient:	± 0.03 % / ˚C (0 to 50 ˚C)
Temperature compensation:	-20 mV/ ˚C (battery sensor)
Vibration:	10 to 500 Hz 2 g for 10 min/cycle within 60 minutes for X-, Y- and Z-axis
Voltage isolation:	- I/P-O/P: 4 kV~ - I/P-FG: 1.7 kV~ - O/P-FG: 0.7 kV~
Insulation resistance:	I/P-O/P: 100 MΩ/500 V
Alarm signal:	Via relay contact
Communication:	Via LIN-BUS
Sleep mode (noise-reduced mode):	Via remote control (optional accessory) or DIP-switch
Device dimensions:	238 x 179 x 63 mm (Length x Depth x Hight)
Weight ca.:	1.9 kg (4.2 lbs)

Protective devices:

Output side short circuit:	Current is reduced to 25 % of the maximum current
Overvoltage:	16 V
Battery charger over temperature:	100 ˚C ± 5 ˚C (measured internally)
Battery over temperature:	52 ˚C ± 5 ˚C (with battery sensor)

Input data:

Rated input voltage:	90 to 260 V~
Output factor correction:	> 97 % (full load)
Input frequency:	50 Hz to 60 Hz
Efficiency at 230 V~:	87 %
Leakage current:	< 1 mA at 240 V~
Input current at 100 V~:	6.2 A
Input current at 240 V~:	2.8 A

Output data:

Charging voltage:	14.4 V / 14.7 V
Retention voltage:	13.8 V
Rated charging current:	35 A
Charging current:	0 to 35 A
Number of outputs:	2
Number of ESB-outputs (Starter battery):	1
ESB-charging voltage:	13.8 V
ESB-charging current:	2 A