ALCAR DEZENT KE BLACK – 16-inch alloy wheel for Light chassis
The ALCAR DEZENT KE BLACK is a black 16-inch alloy wheel for suitable motorhomes, campervans and commercial vehicles with Light chassis wheel fitment. Its distinctive design combines a premium appearance with a load capacity designed for appropriately approved vehicle versions.
The wheel measures 6.5 J × 16 H2, with an offset of 65 mm, a bolt pattern of 5 × 118 mm and a centre bore of 71.1 mm. The maximum permissible wheel load is 1,200 kg per wheel at a rolling circumference of up to 2,312 mm. The net weight is 11.8 kg per wheel.
Which vehicles is the DEZENT KE BLACK suitable for?
The ALCAR approval documents specify applications for certain versions of the Fiat Ducato, Citroën Jumper, Peugeot Boxer, Toyota Proace Max and Opel Movano. Mentioning these vehicle models does not constitute general approval for every version or for all motorhomes built on these base vehicles.
Only the vehicle types, type-approval numbers, wheel and tyre combinations and conditions specified in the applicable ABE approval documents are authoritative. The intended wheel and tyre combination must comply with the approval requirements for the specific vehicle.
ABE and vehicle approval – particularly important for motorhomes
The ALCAR DEZENT KE BLACK has a German General Operating Permit (Allgemeine Betriebserlaubnis, ABE) with KBA number 54891. The current extension carries the approval number 54891*04.
The ABE specifies which vehicles may use this alloy wheel and under what conditions. The fact that your vehicle is, for example, a Fiat Ducato, Peugeot Boxer or Citroën Jumper is not sufficient on its own. The exact vehicle version and intended tyre size must also match the information in the approval documents.
Important: Having an ABE does not automatically mean that the wheel may be fitted to every motorhome based on the corresponding vehicle model. If you are unsure, you should have compatibility checked against your vehicle documents and the relevant approval documents before purchasing.
Why might my motorhome's type-approval number differ from the wheel approval documents?
This does not necessarily mean that the wheel is unsuitable for your motorhome. The difference often arises because the vehicle registration certificate contains the approval number of the completed motorhome, while the wheel approval documents refer to the original approval of the base vehicle. However, whether the wheel may actually be used must still be checked against the complete vehicle documentation and all applicable approval conditions.
Many motorhomes are manufactured under a multi-stage type-approval process. For example, Fiat, Peugeot or Citroën supplies the base vehicle, while the motorhome manufacturer carries out the subsequent body construction or conversion. The completed motorhome may therefore receive its own EU type approval, which differs from the original approval of the base vehicle.
As a result, the approval number entered in field K of a German vehicle registration certificate (Zulassungsbescheinigung Teil I) may differ from the number listed in the ALCAR wheel approval documents, even if the motorhome is built on a base vehicle covered by those documents.
Where can I find the type-approval number of the base vehicle?
An important source of information is the Certificate of Conformity (CoC). For motorhomes approved in several stages, the CoC documents for the base vehicle and the completed vehicle may contain different type-approval numbers. The original approval may also be traceable through additional manufacturer or homologation documents.
Important: Even if the base vehicle's type-approval number matches an entry in the wheel approval documents, this does not automatically establish approval for the completed motorhome. The actual axle loads, vehicle configuration, permissible wheel and tyre combination and all conditions specified in the applicable approval documents must also be considered.
What should I do if my motorhome is not clearly listed in the approval documents?
If your motorhome's type-approval number differs from the information in the approval documents, or if the vehicle application cannot be clearly established, we recommend consulting an authorised vehicle inspection organisation before purchasing. Where possible, have your vehicle registration certificate, available CoC documents and the relevant ALCAR approval documents ready.
Depending on the vehicle and its approval status, an additional technical assessment or modification inspection may be required. The relevant ALCAR documents are available under the "PDF" tab on this product page.
Installation and wheel fastening
For the ALCAR DEZENT KE BLACK, the wheel fastening components specified in the applicable vehicle-specific approval documents must be used. For the Light chassis versions documented here, M14 × 1.5 conical-seat bolts with a 29 mm shank length and a 60° cone angle are specified. The approval documents require the corresponding original equipment wheel bolts.
Important: The required tightening torque depends on the specific vehicle version. Different values are specified in the approval documents. The applicable vehicle-specific annex to the wheel approval documents must therefore always be consulted.
Before installation, all vehicle-specific requirements and approval conditions must be checked. Required vehicle systems, such as an existing tyre pressure monitoring system, must remain functional after changing the wheels. Only suitable balancing weights may be used, and sufficient clearance from brake and suspension components must be ensured.
Installation should be carried out by a qualified workshop. After driving 50 km, the tightening torque of the wheel fastenings must be checked in accordance with the approval requirements.
Good to know – is this alloy wheel suitable for your vehicle?
Whether this alloy wheel is suitable and approved for your vehicle depends on its actual wheel mounting configuration and the information in the applicable approval documents. Further guidance on Light and Heavy/Maxi chassis and how to check vehicle approval can be found in our guide in the parent category "Wheels".