4x ALCAR DEZENT KE DARK – 16-inch alloy wheel set for Heavy/Maxi chassis
This set contains four ALCAR DEZENT KE DARK alloy wheels in black/polished finish for suitable motorhomes, campervans and commercial vehicles with Heavy/Maxi wheel fitment. Their distinctive multi-spoke design with contrasting polished spoke surfaces combines a premium appearance with a construction designed for higher vehicle loads.
Each wheel measures 6.5 J × 16 H2, with an offset of 65 mm, a bolt pattern of 5 × 130 mm and a centre bore of 78.1 mm. The maximum permissible wheel load is 1,350 kg per wheel at a maximum rolling circumference of 2,312 mm.
What's included in the 4-wheel set?
- 4 ALCAR DEZENT KE DARK alloy wheels, black/polished
- 4 matching wheel centre caps
Important delivery information: Wheel bolts are not included. The fastening components specified for the particular vehicle must already be available or obtained separately.
Which vehicles are covered by the DEZENT KE DARK approvals?
The ALCAR approval documents specify applications for certain versions of the Fiat Ducato, Peugeot Boxer, Citroën Jumper, Opel Movano and Toyota Proace Max. Mentioning these vehicle models does not constitute general approval for every version or for all motorhomes built on these base vehicles. Only the vehicle types, type-approval numbers, wheel and tyre combinations and conditions specified in the relevant approval documents are authoritative.
Wheel approval and vehicle homologation – particularly important for motorhomes
The ALCAR DEZENT KE is covered by a German General Operating Permit (Allgemeine Betriebserlaubnis, ABE) issued by the German Federal Motor Transport Authority (KBA), under approval number 54891. Whether these wheels may be fitted to your vehicle depends on the vehicle types, approval numbers, wheel and tyre combinations and conditions specified in the applicable wheel approval documentation.
Why might my motorhome's type-approval number differ from the wheel approval documents?
This does not necessarily mean that the wheels are unsuitable for your motorhome. The difference often arises because the vehicle registration document contains the approval number of the completed motorhome, while the wheel approval documents refer to the original approval of the base vehicle. However, whether the wheels may actually be used must still be verified against the complete vehicle documentation and all applicable approval conditions.
Many motorhomes are manufactured under a multi-stage type-approval process. For example, Fiat, Peugeot or Citroën supplies the base vehicle, while the motorhome manufacturer carries out the subsequent conversion or body construction. The completed motorhome may therefore receive its own EU type approval, which differs from the original approval of the base vehicle.
As a result, the approval number entered in field K of a German vehicle registration certificate (Zulassungsbescheinigung Teil I) may differ from the number listed in the ALCAR wheel approval documents, even if the motorhome is built on a base vehicle covered by those documents.
Where can I find the type-approval number of the base vehicle?
An important source of information is the Certificate of Conformity (CoC). For motorhomes approved in several stages, the CoC documents for the base vehicle and the completed vehicle may contain different type-approval numbers. The original approval may also be traceable through additional manufacturer or homologation documents.
Important: Even if the base vehicle's type-approval number matches an entry in the wheel approval documents, this does not automatically establish approval for the completed motorhome. The actual axle loads, vehicle configuration and all conditions specified in the relevant approval documents must also be considered.
What should I do if my motorhome is not clearly listed in the approval documents?
If your motorhome's type-approval number differs from the information in the wheel approval documents, or if the vehicle application cannot be clearly established, we recommend consulting an authorised vehicle inspection organisation before purchasing the wheels. Where possible, have your vehicle registration documents, available CoC documents and the relevant ALCAR wheel approval documents ready.
Depending on the vehicle and the applicable approval documents, an additional technical assessment or modification inspection may be required. The vehicle-specific ALCAR documents are available under the "PDF" tab on this product page.
Installation and wheel fastening
The ALCAR approval documents specify M16 × 1.5 conical-seat wheel bolts with a 60° cone angle and a 30 mm shank length for the listed vehicle applications. Original equipment (OE) wheel bolts are specified as the fastening accessories. The tightening torque specified in the vehicle-specific documents reviewed is 180 Nm.
Wheel bolts are not included. Before installation, the fastening requirements applicable to the specific vehicle and all approval conditions must be checked. The wheel bolt tightening torque must be checked after driving 50 km. Installation should be carried out by a qualified workshop.
Good to know – is this wheel set suitable for your vehicle?
Whether this wheel set is suitable and approved for your vehicle depends on its actual wheel mounting configuration and the information in the relevant approval documents. Further guidance on Light and Heavy/Maxi chassis and how to check vehicle approval can be found in our guide in the parent category "Wheels".