Dometic Heki 2 de Luxe Tilting Rooflight 960 x 655 mm – With Lighting

The Dometic Heki 2 de Luxe tilting rooflight for caravans provides plenty of natural daylight and fresh air. The lever handle offers three opening positions up to approx. 55°. The well-equipped inner frame features four integrated 12 V lights, a blackout blind made from double-pleated honeycomb material and a flyscreen. The rooflight also features forced ventilation. Roof cut-out: 960 x 655 mm.

Our payment methods:
advance payment transfer PayPal PayPal Credit Card PayPal direct debit Klarna Sofort Klarna Sofort Klarna Sofort

The HEKI 2 Deluxe is only available with forced ventilation.

The four lights (12 V, 4 x 5 Watt) are not dimmable.

The roof window can be installed transversely with the hinge side facing forward in the direction of travel or lengthways (either left or right) to the direction of travel.

The design of the HEKI 2 is suitable for vehicles that do not normally exceed a driving speed of 130 km/h. Excessive wind resistance due to excessive speed can lead to damage to the roof window, which in turn can lead to the loss of any warranty claims.

To reduce wind resistance (and thus any noise that may arise) while driving, the roof window can also (optionally) be fitted with a suitable spoiler from Dometic. Depending on the installation position (transversely or lengthways), two lengths are available:

  • Dometic spoiler 810 mm for lengthways position, or
  • Dometic spoiler 1110 mm for transverse position

A mounting kit for a roof thickness of 25-32 mm is included as standard. Dometic also offers installation kits for the following roof thicknesses:

32-39 mm, 39-46 mm, 46-53 mm or 53-60 mm

If one of the installation kits listed above is required, it must be purchased separately (optional). In such a case, however, it is not possible to offset the cost in exchange for the installation kit included as standard.

The scope of delivery includes

  • the outer frame with glass dome
  • an inner frame
  • 16x fastening screw 4.0 x 25 mm
  • 16x fastening screw 2.5 x 12 mm
  • 16x mounting stands (standard for roof thickness 25-32 mm)
  • 6x ventilation grilles & 4x light covers, as well as
  • multi-lingual assembly and operating instructions

Other accessories, in particular the 4 lamps (12V, 5 watts) as well as sealing or fastening material for larger roof thicknesses, are not included in the scope of delivery.

The roof window is shipped in a padded, stable cardboard box. For insurance reasons, a roof window is always shipped as a single item.

A film is applied at the factory to protect the acrylic glass. Due to previous storage, the roof window may show slight traces of dust.