Dometic Heki 3 Plus Tilting Rooflight 960 x 655 mm – Without Lighting

The Dometic Heki 3 Plus tilting rooflight for motorhomes and caravans provides plenty of natural daylight and fresh air. The double-glazed acrylic dome can be opened continuously using the integrated hand crank, with an opening angle of up to approx. 70°. An integrated blackout blind and a separately operated flyscreen provide additional comfort. Roof cut-out: 960 x 655 mm. Version without lighting.

Our payment methods:
advance payment transfer PayPal PayPal Credit Card PayPal direct debit Klarna Sofort Klarna Sofort Klarna Sofort

The HEKI 3 Plus is only available without lightning in the inner frame as well as without forced ventilation.

The roof window can be installed transversely with the hinge side facing forward in the direction of travel or lengthways (either left or right) to the direction of travel.

The design of the HEKI 3 Plus is suitable for vehicles that do not normally exceed a driving speed of 130 km/h. Excessive wind resistance due to excessive speed can lead to damage to the roof window, which in turn can lead to the loss of any warranty claims.

To reduce wind resistance (and thus any noise that may arise) while driving, the roof window can also (optionally) be fitted with a suitable spoiler from Dometic. Depending on the installation position (transversely or lengthways), two lengths are available:

  • Dometic spoiler 810 mm for lengthways position, or
  • Dometic spoiler 1110 mm for transverse position

A mounting kit for a roof thickness of 25-32 mm is included as standard. Dometic also offers installation kits for the following roof thicknesses:

32-39 mm, 39-46 mm, 46-53 mm or 53-60 mm

If one of the installation kits listed above is required, it must be purchased separately (optional). In such a case, however, it is not possible to offset the cost in exchange for the installation kit included as standard.

In the delivery are included:

  • the outer frame with glass dome
  • the inner frame
  • 16x fastening screw 4,0 x 25 mm
  • 16x fastening screw 2.5 x 12 mm
  • 16x mounting bracket (standard for roof thickness 25-32 mm)
  • 10x inner frame covers,
  • 1x crank drive sproket adapter, and
  • a mulit-langual installation and operating manual.

Other accessory, such as sealant or spoiler, is not part of the scope of delivery!

The roof window is shipped in a padded, stable cardboard box. For insurance reasons, a roof window is always shipped as a single item.

A film is applied at the factory to protect the acrylic glass. Due to previous storage, the roof window may show slight traces of dust.