Dometic PERFECTCHARGE MCA 2440, 24 V, 40 A
IU0U battery charger the simultaneous charging of three board batteries!
With its three battery outlets the Dometic PERFECTCHARGE MCA 2440 can charge three 24V board batteries at the same time. And with input voltages from 110 V to 230 V it can be used anywhere in the world and continues to charge even when the input voltage drops. In addition, with the integrated multi-level charging technology, this device provides your batteries very gently. In sleep mode, the device provides noiseless charging at half power, making it ideal for the night or on electrically poorly secured parking spaces.
Possible damage to the device or the batteries prevents the integrated protection in case of short circuit, overvoltage or overheating. In its compact and lightweight design, it is easy to assemble and can be smoothly integrated into existing CAN bus systems via an existing interface. In addition, it is compatible with the optional Dometic MPC 01 battery management system, so you can manage the power perfectly.
Product safety information
Manufacturer information:
Dometic Germany GmbH
Hollefeldstr. 63
Nordrhein-Westfalen
Emsdetten, Deutschland, 48282
info@dometic-waeco.de
https://www.dometic.com/
| Item information |
Value |
| Shipping weight: |
5,10 kg
|
| Item weight: |
3,90 kg
|
| Suitable battery types: |
Lead-acid, gel, AGM and Li-Ion |
| Heat dissipation: |
With fan |
| Charge mode: |
5-level |
| Maximum ambient temperature: |
-20 °C to +50 °C |
| Storage temperature: |
-40 °C to +85 °C |
| Air humidity: |
20 to 90 % |
| Temperature coefficient: |
± 0.03 % / ˚C (0 to 50 ˚C) |
| Temperature compensation: |
-20 mV/ ˚C (battery sensor) |
| Vibration: |
10 to 500 Hz
2 g for 10 min/cycle within 60 minutes for X-, Y- and Z-axis |
| Voltage isolation: |
- I/P-O/P: 4 kV~
- I/P-FG: 1.7 kV~
- O/P-FG: 0.7 kV~ |
| Insulation resistance: |
I/P-O/P: 100 MΩ/500 V |
| Alarm signal: |
Via relay contact |
| Communication: |
Via LIN-BUS |
| Sleep mode (noise-reduced mode): |
Via remote control (optional accessory) or DIP-switch |
| Device dimensions: |
303 x 208.5 x 75 mm (Length x Depth x Hight) |
| Weight ca.: |
3.9 kg (8.6 lbs) |
Protective devices:
| Output side short circuit: |
Current is reduced to 25 % of the maximum current |
| Overvoltage: |
16 V |
| Battery charger over temperature: |
100 ˚C ± 5 ˚C (measured internally) |
| Battery over temperature: |
52 ˚C ± 5 ˚C (with battery sensor) |
Input data:
| Rated input voltage: |
90 to 260 V~ |
| Output factor correction: |
> 97 % (full load) |
| Input frequency: |
50 Hz to 60 Hz |
| Efficiency at 230 V~: |
90 % |
| Leakage current: |
< 1 mA at 240 V~ |
| Input current at 100 V~: |
13.3 A |
| Input current at 240 V~: |
5.4 A |
Output data:
| Charging voltage: |
28.8 V / 29.4 V |
| Retention voltage: |
27.6 V |
| Rated charging current: |
40 A |
| Charging current: |
0 to 40 A |
| Number of outputs: |
3 |
Im Lieferung enthalten ist
- das Batterie-Ladegerät
- ein 230-V-Anschlusskabel, sowie
- eine mehrsprachige Installations- und Bedienungsanleitung
Sonstiges Zubehör, wie z. B. Befestigungsmaterial, ist nicht Bestandteil des Lieferumfangs!
SHOPVOTE - Bewertungen
There are no product reviews available yet