Dometic PerfectPower DCC 1212-10 charging converter, 12 Volt
With 10 ampere charging current you will never arrive at your destination with empty batteries!
This is ensured by the Dometic PerfectPower DCC 1212, in which your supply batteries are optimally charged while driving or their charge level is maintained.
At the same time, the charging converter delivers sufficient power even over short distances and completely charges batteries on longer trips without the risk of overloading. This will ensure that sulphation is prevented, which is usually the cause of lead acid battery premature failure and extend the life of your batteries significantly.
Even with modern vehicles in the EURO 6 class with intelligent alternator, this DC charging converter works reliably and generates a stable output voltage. With the constant power supply even sensitive devices can be used.
Good to know!
The charging converter charges batteries while driving, which are used on board mobile homes or boats to generate electricity or supplies them with a float voltage so that they do not discharge.
The 12 volt voltage of a vehicle starter battery is transformed into a stable DC voltage to a 12 volt supply or on-board battery. Due to the galvanic isolation of input and output voltage, the output voltage can be kept stable regardless of voltage fluctuations in the input circuit.
Scope of delivery
In the delivery are included
- the DCC 1212-10, and
- a multi-lingual installation and operating manual
Other accessory like mounting material, a battery sensor or something else are not part of the delivery!
Product safety information
Manufacturer information:
Dometic Germany GmbH
Hollefeldstr. 63
Nordrhein-Westfalen
Emsdetten, Deutschland, 48282
info@dometic-waeco.de
https://www.dometic.com/
| Item information |
Value |
| Shipping weight: |
1,80 kg
|
| Item weight: |
1,30 kg
|
| Transformation: |
12 V → 12 V |
| Nominal input voltage: |
12 V |
| Input voltage range |
8 V - 16 V |
| Charging current: |
10 A |
| Charging voltage: |
13,2 V - 14,7 V |
| Output: |
120 W |
| Residual ripple of output voltage at rated current: |
<50 mVeff |
| Efficiency up to: |
90 % |
| Idle power consumption: |
<0.4 A |
| Ambient temperature for operation: |
-20 ˚C to +50 ˚C |
| Ambient humidity: |
≤95 %, non-condensing |
| Device dimension: |
153 x 73 x 180 mm (Width x Depth x Hight) |
| Weight ca.: |
1.3 kg (2.8 lbs) |
Protection devices:
| Input: |
High voltage, low voltage, reverse polarity protection (internal fuse) |
| Low voltage shutdown: |
8 V |
| Low voltage restart: |
10 V |
| High voltage shutdown: |
16 V |
| High voltage restart: |
15.5 V |
| Temperature: |
Shutdown |
| Short circuit protection: |
YES, Ipk |
Im Lieferumfang enthalten ist
- der DCC 1212-10, sowie
- eine mehrsprachige Installations- und Bedienungsanleitung
Anderes Zubehör, wie z. B. Befestigungsmaterial oder ein Batteriesensor, ist nicht Bestandteil des Lieferumfangs!
Der Ladewandler lädt während der Fahrt Batterien, welche an Bord von Wohnmobilen oder Booten für die Stromerzeugung genutzt werden bzw. versorgt diese mit einer Erhaltungsspannung, so dass sich diese nicht entladen.
Dabei wird die 12 Volt Spannung einer Fahrzeug-Starterbatterie in einer stabilen Gleichspannung an eine 12 Volt Versorgungs- oder Bordbatterie transformiert. Durch die galvanische Trennung von Eingangs- und Ausgangsspannung kann die Ausgangsspannung unabhängig von Spannungsschwankungen im Eingangskreis stabil gehalten werden.
SHOPVOTE - Bewertungen
There are no product reviews available yet
