Dometic SINEPOWER DPSI 1812iTS – 1800 W / 12 V Sine Wave Inverter with Integrated Transfer Switch
Powerful sine wave inverter with intelligent power transfer
The Dometic SINEPOWER DPSI 1812iTS is a powerful 12 V sine wave inverter with 1800 W continuous power and an integrated priority circuit. It converts DC power from the vehicle battery into a pure 230/240 V sine wave AC supply, providing reliable power for suitable 230 V appliances in motorhomes and other vehicles.
When an external 230 V mains supply or shore power is available, the integrated priority circuit supplies the connected appliances from this external power source. When no mains supply is available, the inverter provides power from the vehicle battery.
1800 W continuous power with high power reserve
The DPSI 1812iTS provides 1800 W continuous power. For appliances requiring temporarily higher power, it delivers 2070 W for up to 3 minutes and 3600 W surge power for up to 2 seconds.
This provides additional power reserves for appliances that temporarily require more power when starting. Actual suitability always depends on the power consumption and starting current of the respective appliance.
Pure sine wave with precise output voltage
The inverter generates a pure sine wave with 230/240 V ±3 % at 50/60 Hz. Total harmonic distortion is maximum 3 % THD at rated power with a resistive load.
The pure sine wave output provides a stable AC supply for a wide range of suitable 230 V appliances using power from the vehicle battery.
Intelligent transfer switch for shore power and battery operation
The integrated priority circuit automatically supplies the connected appliances from the external 230 V power source whenever it is available.
When no external mains power is available, the DPSI 1812iTS generates the required AC power from the 12 V vehicle battery. The inverter and automatic transfer function are therefore combined in a single unit.
Configurable energy-saving mode
To reduce its own power consumption, the DPSI 1812iTS features a configurable energy-saving mode. Depending on the selected setting, the inverter can return to normal operation when a connected load of 1 W or 45 W is detected.
Automatic shutdown after 20 minutes in energy-saving mode can also be configured. This allows the operating behaviour to be adapted to different applications.
N-BUS and CI-BUS for convenient control
The DPSI 1812iTS supports N-BUS and CI-BUS and can therefore be integrated into suitably equipped energy systems. Operating and consumption data can be displayed, for example, via the optional Dometic TD283 touch display or the Dometic Power App.
The DSP-RCT remote control and DSP-EM control monitor are also available as optional accessories.
Integrated protection features
For reliable operation, the inverter features protection against overvoltage, undervoltage, overtemperature, high output current and short circuit. In the event of overvoltage, undervoltage or overtemperature, the inverter automatically restarts once suitable operating conditions have been restored.