Rims

Motorhome Alloy Wheels: Light or Heavy/Maxi – Which Wheels Fit Your Vehicle?

Would you like to equip your motorhome, campervan or panel van with new alloy wheels? Before ordering, you should check which wheel mounting configuration your vehicle has and whether the selected wheels are approved for your particular vehicle.

Fiat Ducato, Peugeot Boxer and Citroën Jumper vehicles are commonly available with Light or Heavy chassis configurations. The Heavy version is also known as the Maxi chassis. The newer Stellantis-based Opel Movano and Toyota Proace Max belong to the same related family of commercial vehicles.

Although these vehicles share many technical features, their chassis configurations, wheel mounting dimensions and vehicle approvals may differ. This guide explains what you need to consider when choosing suitable alloy wheels for your motorhome.

Light and Heavy/Maxi: The Main Differences

The standard wheel mounting configurations used on Fiat Ducato-based vehicles differ primarily in their bolt pattern, centre bore and wheel bolt thread size.

Technical specification Light Heavy / Maxi
Bolt pattern (PCD) 5 × 118 mm 5 × 130 mm
Centre bore 71.1 mm 78.1 mm
Wheel bolt thread M14 M16
Common wheel diameter 15 or 16 inches 16 inches

Important: These specifications describe the usual wheel mounting configurations. The chassis designation alone is not always sufficient to determine which wheels are suitable for your vehicle.

How Can I Identify a Light or Heavy Chassis?

1. Check the Manufacturer's Identification Plate

On many Fiat Ducato vehicles from the X250 and X290 generations, the chassis configuration can be identified using the version code on the manufacturer's identification plate.

  • Light chassis: Version letters A, B, C, G or L
  • Heavy/Maxi chassis: Version letters D, E, H or M

These letters refer to the relevant version code and must not be confused with other information on the identification plate. Peugeot Boxer, Citroën Jumper, Opel Movano and Toyota Proace Max vehicles may use different identification systems.

The chassis designation provides initial guidance but does not replace checking the actual wheel mounting configuration.

2. Check the Wheel Hub Diameter

One particularly useful distinguishing feature is the diameter of the wheel hub at its centring surface.

  • Approximately 71.1 mm: Standard Light wheel mounting configuration with a 5 × 118 mm bolt pattern
  • Approximately 78.1 mm: Standard Heavy/Maxi wheel mounting configuration with a 5 × 130 mm bolt pattern

If removing a wheel is necessary to take this measurement, the work should be carried out by a qualified workshop.

The colour of existing steel wheels is not a reliable identifying feature. Engine power, permissible gross vehicle weight and the presence of 16-inch wheels are also insufficient on their own to identify the correct configuration.

3. Special Considerations for Certain Automatic Vehicles

Some newer Fiat Ducato models with automatic transmissions, particularly Series 8 vehicles, may have the larger Heavy/Maxi wheel mounting configuration even when fitted with a Light chassis.

When selecting alloy wheels, you should therefore not rely exclusively on the Light or Heavy chassis designation. The actual wheel mounting dimensions and the applicable vehicle approval are decisive.

Vehicle Type and Type Approval Number: What Must Match the Wheel Approval Documents?

A wheel that fits mechanically is not automatically approved for every vehicle. In addition to the bolt pattern and centre bore, your vehicle must be covered by the scope of application specified in the relevant wheel approval documents.

For vehicles registered in Germany, the most important information can be found in the registration certificate, Part I (Zulassungsbescheinigung Teil I):

  • Field D.2: Vehicle type, variant and version.
  • Field K: EC/EU vehicle type approval number or national general operating permit number (ABE).
  • Field P.2: Rated engine power in kW.
  • Fields 7.1 and 7.2, and 8.1 and 8.2: Axle load information.

Compare this information with the vehicle applications and conditions listed in the wheel approval documents. The vehicle, including its relevant type approval, must be covered by the stated scope of application. For vehicles registered in other countries, consult the corresponding registration and approval documents.

Example: Type Approval Number in an ALCAR Wheel Approval Report

The ALCAR DEZENT KE approval report for the Fiat Ducato includes the following type approval number:

e3*2007/46*0049*..

The two dots represent the position of the type approval extension number. The complete number shown in the vehicle documents may therefore be longer.

For example, the vehicle documents might show:

e3*2007/46*0049*12

The extension *12 is used here for illustration only. What matters is whether the specific vehicle version and the relevant approval extension are covered by the scope of application of the wheel approval report. A matching number prefix alone does not constitute complete proof of approval.

Special Considerations for Motorhomes: Base Vehicle Type Approval

Many motorhomes are built by converting an originally approved base vehicle, such as a Fiat Ducato or Citroën Jumper. The motorhome manufacturer adds the living accommodation and other equipment.

For vehicles approved through a multi-stage type approval process, the approval number shown in the registration documents may differ from that of the original base vehicle.

Such a difference does not necessarily mean that the selected wheel is mechanically unsuitable. The base vehicle approval may be traceable through the Certificate of Conformity (CoC) or other vehicle approval documents.

Please note: Proof of the base vehicle's approval does not automatically mean that the wheel is approved for use on the completed motorhome without further inspection.

ALCAR expressly states that its vehicle-specific wheel approval reports cover only the vehicle versions described and tested in those documents. A separate technical assessment may therefore be required for motorhomes with different approval details.

What If My Vehicle Is Not Listed in the Wheel Approval Report?

If your specific vehicle version is not covered by the scope of application of the wheel approval report, an individual vehicle inspection and approval may be possible under certain conditions.

Whether such an approval can be obtained depends on the particular vehicle, the technical suitability of the wheels and the available supporting documentation.

We therefore recommend consulting an authorised vehicle inspection body before ordering. Provide the complete wheel approval report and your vehicle documents to clarify whether an individual approval is possible under the regulations applicable in your country.

Which Other Specifications Must Match the Wheel Approval Report?

In addition to the vehicle type and approval number, the following requirements must be considered:

  • The wheel's approved load capacity must be sufficient for the vehicle's permitted axle loads.
  • The wheel dimensions and offset must be approved for the relevant vehicle version.
  • The intended tyre size must be covered by the scope of application.
  • All vehicle-specific and tyre-specific conditions must be met.
  • The specified wheel fastening components must be used.
  • Any mandatory modification inspections or approvals must be completed.

Important: Even wheels with a German General Operating Permit (ABE) are not automatically approved for unrestricted use on every listed vehicle. The ABE, the associated technical reports and all specified conditions must be observed.

Practical Example: ALCAR DEZENT KE for Fiat Ducato

The ALCAR DEZENT KE, KBA approval number 54891, is available in a version with dimensions of 6.5 J × 16 H2, an offset of ET 65, a 5 × 130 mm bolt pattern and a centre bore of 78.1 mm.

The associated ABE and vehicle-specific approval report specify the approved vehicle versions, wheel and tyre combinations and applicable conditions.

For certain combinations listed in the report, condition 11A requires a modification inspection.

You can view the original documents here:

This example is provided for guidance only. Other wheel models and vehicles are subject to their respective approval documents.

Not Sure Which Alloy Wheels Fit Your Motorhome?

We will be happy to help you choose suitable wheels. The following information is particularly useful:

  • Vehicle manufacturer, model and year of manufacture
  • Vehicle type and approval number from the vehicle documents
  • Engine power in kW
  • Existing wheel mounting configuration or wheel hub diameter
  • Desired wheel and tyre dimensions

This information helps us assess the suitability of the selected wheels more accurately. If there are uncertainties concerning legal approval, an authorised vehicle inspection body should also be consulted.

Not just any product. The right one!



Items 1 - 22 of 22