Dometic PerfectView CAM 18 NAV – Compact Reversing and Side Camera with Navigation Adapter
The Dometic PerfectView CAM 18 NAV is a compact black dome-shaped colour camera suitable for use as either a reversing camera or a side-view camera on motorhomes, caravans, vans and other suitable vehicles. Its 140° diagonal viewing angle provides wide coverage of the vehicle surroundings, assisting the driver when reversing, manoeuvring and monitoring areas alongside the vehicle.
The main difference compared with the standard CAM 18 is the included Dometic AMP50 connection adapter. This allows the camera to be connected to compatible multimedia or navigation systems with a suitable video input. An existing screen can therefore be used to display the camera image, provided that the technical connection requirements are met.
Thanks to its low-profile design and adjustable camera head, the CAM 18 NAV can be installed in different positions on the vehicle and aligned with the required field of view. The black ABS plastic housing is designed for outdoor use.
140° Wide Angle for Reversing and Side-View Applications
The wide-angle lens covers a large area behind or alongside the vehicle. This makes the CAM 18 NAV particularly useful when manoeuvring, parking or driving in situations where direct visibility around the vehicle is restricted.
When used as a reversing camera, it is mounted at the rear of the vehicle and directed towards the area behind it. As a side-view camera, it can be used to monitor an area alongside the vehicle, for example on longer motorhomes or vans.
Important: Actual visibility depends on the mounting position, camera alignment and vehicle geometry. Areas outside the camera's field of view may remain even with a 140° viewing angle.
Infrared Night Vision and Built-In Microphone
Five integrated infrared LEDs support image visibility in darkness and improve the recognition of the immediate vehicle surroundings in low ambient light.
The built-in microphone allows ambient sounds to be transmitted to a compatible display system. This function can be particularly useful when manoeuvring with the assistance of another person providing instructions from outside the vehicle. Whether audio transmission can be used depends on the connections and functions of the display system.
The camera uses a 1/3-inch CMOS image sensor with 350,000 pixels and transmits video in the analogue PAL standard.
Weather-Resistant ABS Housing with IP69K Protection Rating
The black camera housing is made of ABS plastic and is designed for outdoor installation. The IP69K protection rating indicates a high level of protection against the ingress of dust and water under the specified test conditions.
The compact dome-shaped design allows the camera head to be aligned with the required field of view. The mounting position must be selected according to the vehicle geometry and the Dometic installation manual.
Connection to Multimedia and Navigation Systems
The CAM 18 NAV is supplied with the Dometic AMP50 connection adapter. This adapter is designed to connect the camera to compatible multimedia or navigation systems equipped with a suitable video input.
The included 20 m system cable provides the connection between the camera installed on the vehicle and the intended display system.
Please note: The AMP50 connection adapter does not guarantee universal compatibility with all multimedia or navigation devices. Before ordering, check whether the intended display system supports the analogue PAL video standard and has the necessary connectors and matching pin assignment.
Use of the built-in microphone also depends on whether the connected system supports the required audio transmission.
The camera requires an operating voltage of 9–12 V DC. The power supply and connections must comply with the Dometic installation manual and the technical requirements of the display system used.
Installation and Alignment of the Dome Camera
Depending on the intended application, the CAM 18 NAV can be installed at the rear of the vehicle or in a suitable position along its side. The adjustable camera head allows the field of view to be adapted to the installation location.
When selecting the mounting position, ensure a clear field of view, secure attachment and protected routing of the connection cable. The required cable opening and further installation steps are described in the Dometic installation manual.
Scope of Delivery
The Dometic PerfectView CAM 18 NAV is supplied with:
- 1 black reversing and side-view camera with adjustable camera head
- 1 system cable, 20 m
- 1 Dometic AMP50 connection adapter for compatible multimedia and navigation systems
- Installation materials according to the manufacturer's specifications
- Installation and operating manual
Note: A monitor or navigation device is not included. Compatibility with the intended display system must be checked before ordering.
Safety information: The camera is an auxiliary visibility aid. Technical limitations and areas outside the camera's field of view may remain. It does not replace direct observation of the vehicle surroundings or the driver's attention and care.