Dometic PerfectView CAM 44 – Dual Camera for Close-Range and Long-Range Viewing
The Dometic PerfectView CAM 44 combines two cameras with different viewing angles in a silver aluminium housing. Designed for installation at the rear of a vehicle, it allows the driver to monitor both the area immediately behind the vehicle when manoeuvring and traffic approaching from behind while driving.
The two lenses serve different purposes: the wide-angle camera covers the close-range area when reversing, while the long-range camera provides a narrower field of view for observing traffic further behind the vehicle. This makes the CAM 44 particularly suitable for motorhomes and other vehicles with restricted direct rearward visibility.
Two Camera Views with 140° Wide Angle and 50° Long-Range View
The CAM 44 features two separate camera modules:
-
Close-range camera with a 140° diagonal viewing angle: The wide-angle lens shows the area immediately behind the vehicle and assists the driver when reversing, parking and manoeuvring.
-
Long-range camera with an approximately 50° viewing angle: The second lens allows the driver to monitor traffic behind the vehicle, for example while driving forwards.
When reverse gear is engaged, the close-range camera is activated. The long-range camera can also be used independently of reversing. Manual or automatic selection of the camera view depends on how the camera is integrated into the connected monitor system.
Coloured Distance Markers When Reversing
In reversing mode, the CAM 44 generates three coloured reference lines that are displayed on a connected colour monitor. They help the driver estimate the distance to obstacles behind the vehicle.
According to Dometic, the following approximate distances apply when the camera is installed at a height of around 230 to 250 cm:
-
Green line: approx. 3 m
-
Yellow line: approx. 1 m
-
Red line: approx. 0.3 m
Important: These distances apply only to the specified installation height. If the camera is installed at a different height, the actual distances must be checked and assessed accordingly. The reference lines are intended solely as a visual aid and do not replace direct observation of the vehicle surroundings.
Motorised Shutter and Infrared Night Vision
A motorised shutter protects the camera against dirt. The close-range lens is covered by the shutter when it is not required. The long-range camera can also be used while the shutter is closed.
Integrated infrared LEDs improve visibility in the close-range area in darkness. This helps the CAM 44 assist with manoeuvring even in very low ambient light.
The built-in microphone transmits ambient sounds to a compatible monitor system. This can be useful, for example, when another person is positioned behind the vehicle to provide parking guidance.
Connection and Compatibility with Monitor Systems
The CAM 44 uses the analogue PAL video signal. A CAM44 adapter box, manufacturer part number 9102200078, is included. It allows the two camera signals to be connected to a suitable monitor system.
The camera is connected to the TWIN socket on the adapter box using the supplied system cable. The V1 and V2 connections are used to connect the corresponding camera inputs on the monitor.
Please note: The intended monitor system must support the required video inputs and connection functions. The CAM44 adapter box does not guarantee universal compatibility with all monitors or navigation devices. Before ordering, check the PAL video signal, connectors and the available options for switching between the two camera views.
The camera provides a mirrored image. According to Dometic, a connected monitor must therefore have a corresponding normal-image function.
Installation at the Rear of the Vehicle
Dometic recommends an installation height of at least 2 m. The camera should preferably be mounted centrally and horizontally at the rear of the vehicle. The supplied insulating pad must be used during installation.
The camera should be aligned so that the area immediately behind the vehicle or the bumper is visible along the lower edge of the image. The exact mounting position and alignment depend on the vehicle geometry and the Dometic installation and operating manual.
Scope of Delivery
The Dometic PerfectView CAM 44 is supplied with:
- 1 silver dual reversing camera with motorised shutter
- 2 side covers
- 1 camera guard
- 1 camera mounting bracket
- 1 insulating pad
- 1 CAM44 adapter box, manufacturer part number 9102200078
- 1 system or extension cable, 20 m, manufacturer part number 9102200030
- Mounting materials
- Installation and operating manual
Note: A monitor is not included. Compatibility with the intended monitor system must be checked before ordering.
Safety information: The dual camera is an auxiliary visibility aid. Despite its two camera views, technical limitations and areas outside the cameras' fields of view may remain. The system does not replace direct observation of the vehicle surroundings or the driver's attention and care.