Dometic PerfectView CAM 44 NAV – Dual Camera with Navigation Adapter
The Dometic PerfectView CAM 44 NAV combines two cameras with different viewing angles in a silver aluminium housing. Designed for installation at the rear of a vehicle, it allows the driver to monitor both the area immediately behind the vehicle when manoeuvring and traffic behind the vehicle while driving.
The main difference compared with the standard CAM 44 is the included Dometic AMP50 connection adapter. In the NAV version, this replaces the standard CAM44 adapter box and allows the camera to be connected to compatible multimedia and navigation systems. An existing screen can therefore be used to display the camera image, provided that the technical connection requirements are met.
The standard CAM44 adapter box (manufacturer part number 9102200078) is not included with the CAM 44 NAV. The AMP50 is also available separately as an accessory or for retrofitting.
Two Camera Views with 140° Wide Angle and 50° Long-Range View
The CAM 44 NAV features two separate camera modules:
-
Close-range camera with a 140° diagonal viewing angle: The wide-angle lens shows the area immediately behind the vehicle and assists the driver when reversing, parking and manoeuvring.
-
Long-range camera with an approximately 50° viewing angle: The second lens allows the driver to monitor traffic behind the vehicle, for example while driving forwards.
When reverse gear is engaged, the close-range camera can be activated through the appropriate control signal. The long-range camera is designed for monitoring the area behind the vehicle while driving. Which camera views are available and how switching between them is performed depend on the functions and connections of the multimedia or navigation system used.
Coloured Distance Markers When Reversing
In reversing mode, the CAM 44 NAV generates three coloured reference lines that are displayed on a compatible display device. They help the driver estimate the distance to obstacles behind the vehicle.
According to Dometic, the following approximate distances apply when the camera is installed at a height of around 230 to 250 cm:
-
Green line: approx. 3 m
-
Yellow line: approx. 1 m
-
Red line: approx. 0.3 m
Important: These distances apply only to the specified installation height. If the camera is installed at a different height, the actual distances must be checked and assessed accordingly. The reference lines are intended solely as a visual aid and do not replace direct observation of the vehicle surroundings.
Motorised Shutter and Infrared Night Vision
A motorised shutter protects the close-range lens against dirt when it is not required. The long-range camera can also be used while the shutter is closed.
Integrated infrared LEDs improve visibility in the close-range area in darkness. This helps the CAM 44 NAV assist with manoeuvring even in very low ambient light.
The built-in microphone allows ambient sounds to be transmitted to a compatible display system. This can be useful, for example, when another person is positioned behind the vehicle to provide parking guidance.
Connection to Multimedia and Navigation Systems
The CAM 44 NAV uses the analogue PAL video signal. The included Dometic AMP50 connection adapter is designed for connecting the camera to compatible multimedia and navigation systems.
Please note: The AMP50 does not guarantee universal compatibility with all navigation devices. Before ordering, check the supported video signal, connectors, pin assignments and the available options for selecting or switching between the two camera views.
Transmission of the microphone signal also requires a compatible display system. The camera provides a mirrored image; the connected system must support the necessary image processing or display settings.
The exact connection and switching options must be checked against the Dometic installation and operating manual and the technical documentation of the intended multimedia or navigation device.
Installation at the Rear of the Vehicle
Dometic recommends an installation height of at least 2 m. The camera should preferably be mounted centrally and horizontally at the rear of the vehicle. The supplied insulating pad must be used during installation.
The camera should be aligned so that the area immediately behind the vehicle or the bumper is visible along the lower edge of the image. The exact mounting position and alignment depend on the vehicle geometry and the Dometic installation and operating manual.
Scope of Delivery
The Dometic PerfectView CAM 44 NAV is supplied with:
- 1 silver dual reversing camera with motorised shutter
- 2 side covers
- 1 camera guard
- 1 camera mounting bracket
- 1 insulating pad
- 1 Dometic AMP50 connection adapter for compatible multimedia and navigation systems
- 1 system cable, 20 m
- Mounting materials
- Installation and operating manual
Note: A monitor or navigation device is not included. The standard CAM44 adapter box (manufacturer part number 9102200078) is also not included. Compatibility with the intended display system must be checked before ordering.
Safety information: The dual camera is an auxiliary visibility aid. Despite its two camera views, technical limitations and areas outside the cameras' fields of view may remain. The system does not replace direct observation of the vehicle surroundings or the driver's attention and care.