Dometic PerfectView CAM 45W – White Reversing Camera for Motorhomes and Caravans
The Dometic PerfectView CAM 45W assists drivers when manoeuvring, reversing and parking. The white colour camera is mounted at the rear of the vehicle and transmits a view of the area behind it to a suitable monitor. Particularly on larger motorhomes, caravans and vans, it helps drivers observe areas that are difficult to see directly from the driver's seat.
The robust aluminium housing protects the camera technology during everyday vehicle use. The camera is designed for connection to a suitable reversing video system and provides a mirrored image, corresponding to the view in a rear-view mirror.
Switchable AHD and CVBS Video Signals
The CAM 45W supports both analogue CVBS video and AHD (Analog High Definition). This allows it to be used with different compatible monitor systems.
The video signal format is selected using a trigger loop at the camera connection:
-
CVBS: The trigger loop remains closed.
-
AHD: The trigger loop is opened according to the installation manual.
Important: Before installation, check which video signal format the existing monitor supports. Support for AHD or CVBS alone does not guarantee full connection compatibility. Connectors, pin assignments and any necessary adapters must also be considered.
Infrared Night Vision, Microphone and Integrated Heater
The integrated infrared LEDs improve visibility around the vehicle in the dark. They support the camera even when very little ambient light is available.
A built-in microphone also allows ambient sounds to be transmitted to a compatible monitor system. This can be helpful when manoeuvring, for example when another person is positioned behind the vehicle to provide guidance.
The temperature-controlled camera heater supports operation at low outside temperatures. Together with the weather-protected housing, the CAM 45W is designed for use at the rear of the vehicle.
Viewing Angle and Installation at the Rear of the Vehicle
According to Dometic's product specifications, the camera offers a diagonal viewing angle of 120°. The horizontal and vertical viewing angles vary depending on the selected video signal format.
Dometic recommends an installation height of at least 2 m to achieve a suitable viewing angle. The camera should preferably be mounted centrally at the rear of the vehicle and aligned so that the rear area of the vehicle or the bumper is visible along the lower edge of the image.
The exact mounting position and alignment must be determined according to the vehicle geometry and the Dometic installation and operating manual.
Scope of Delivery
The Dometic PerfectView CAM 45W is supplied with:
- 1 white reversing camera
- 1 camera mounting bracket
- 2 side covers
- 1 system cable, 15 m
- Mounting hardware according to the manufacturer's specifications
- Installation and operating manual
Please note: A monitor is not included. Before ordering, check whether the camera can be connected to the intended monitor or reversing video system.
Safety information: The reversing camera is an auxiliary visibility aid. Technical limitations and areas outside the camera's field of view may remain. It does not replace direct observation of the vehicle surroundings or the driver's attention and care.