Dometic PerfectView CAM 29S – Compact Reversing Camera without System Cable
The Dometic PerfectView CAM 29S is a compact reversing camera designed for external installation on campervans, motorhomes, caravans and other suitable vehicles. Its low-profile design and black housing allow discreet integration at the rear of the vehicle. It assists the driver when reversing, manoeuvring and parking by displaying the area behind the vehicle on a suitable monitor.
This version of the CAM 29S is supplied without a system cable. It is particularly suitable for replacing an existing CAM 29S when the previously installed cabling can continue to be used. A new installation is also possible, provided that a suitable connection cable is purchased separately and all technical connection requirements are met.
160° Wide Angle for a Broad Rear View
The CAM 29S wide-angle lens has a diagonal viewing angle of 160°. The horizontal viewing angle is approximately 130°, while the vertical viewing angle is approximately 100°. This allows a large area behind the vehicle to be covered.
The integrated 1/4-inch CMOS image sensor provides an image resolution of 640 × 480 pixels. The camera features a preset mirror-image function, allowing the area behind the vehicle to be displayed in a format suitable for reversing applications.
Important: The actual visible area depends on the mounting position, camera alignment and vehicle geometry. Areas outside the camera's field of view may remain despite the wide viewing angle.
Compact Design for Campervans and Motorhomes
Measuring just 76 × 29 × 33 mm and weighing approximately 80 g, the CAM 29S can be installed at the rear of the vehicle without taking up much space. Its compact design is particularly suitable for vehicles where an unobtrusive camera installation is preferred.
For use as a reversing camera, Dometic recommends installation in the upper central area of the vehicle's rear. The mounting location must be sufficiently stable to ensure secure attachment.
After installation, the camera is aligned using the monitor image. Care should be taken to ensure that the displayed image is level.
Weather-Resistant Camera Housing
The CAM 29S is designed for external installation on vehicles. Its housing provides protection against the ingress of dust and water corresponding to protection rating IP68.
The camera is designed for operating temperatures from −20 °C to +70 °C, making it suitable for use in different climatic conditions.
Care instructions: Do not clean the camera directly with a high-pressure water jet. Do not open the housing or pull on the camera cable, as this may compromise the watertight seal.
Ideal as a Replacement Camera for an Existing CAM 29S System
This version is particularly suitable for vehicle owners who need to replace their existing CAM 29S while the installed connection cable and monitor are still functioning correctly.
As no additional 20 m system cable is supplied, there is no need to purchase another complete connection cable when carrying out a compatible camera replacement.
Please note: Before ordering, check that the existing cabling and monitor system are compatible with the CAM 29S. The camera is not automatically interchangeable with all 6-pin camera systems from other manufacturers.
Connection and Compatibility with Reversing Monitors
The CAM 29S has a 6-pin Mini-DIN connector and is designed for connection to a suitable reversing monitor or compatible reversing camera system.
Important: A system cable is not included with this version. For a new installation or if the existing cabling is missing or damaged, a suitable connection cable must be purchased separately.
Before ordering, the electrical and mechanical connection requirements must be checked. A matching 6-pin connector alone does not guarantee universal compatibility with all monitor systems.
The camera operates at 12 V DC with a current consumption of 60 mA. Electrical connections must be made in accordance with the Dometic installation and operating manual.
Installation and Camera Alignment
When installing the camera, select a suitable mounting location with a clear view behind the vehicle. Existing or newly installed cabling must be protected against moisture and mechanical strain.
After mounting, the camera is aligned using the monitor image. The necessary installation steps and electrical connections are described in the Dometic installation and operating manual.
Scope of Delivery
The Dometic PerfectView CAM 29S (manufacturer part number 9600024660) is supplied with:
- 1 Dometic PerfectView CAM 29S reversing camera in black
- Mounting materials
- Installation and operating manual
Important: A system cable and reversing monitor are not included. Compatible cabling and a suitable display system are required for operation.
Alternative with system cable: The CAM 29S is also available with a 20 m connection cable included (manufacturer part number 9600000199). This version is particularly suitable when compatible cabling has not yet been installed.
Safety information: The reversing camera is an auxiliary visibility aid. It does not replace direct observation of the vehicle surroundings or the driver's attention and care.