Dometic PerfectView CAM 35 2.0 TWIN – Reversing Camera with Close-Range and Long-Distance Views
The Dometic PerfectView CAM 35 2.0 TWIN combines two camera modules in a vehicle-specific housing designed for the third brake light. While the 150° wide-angle camera covers the area immediately behind the vehicle when reversing and manoeuvring, the additional 90° long-distance view camera allows the driver to monitor traffic behind the vehicle while driving forwards.
The camera housing replaces the factory-fitted surround of the third brake light. The existing original light unit is transferred to the new housing and reused. Both camera modules are therefore discreetly integrated into the rear of the vehicle.
Compatible Vehicle Models
The Dometic PerfectView CAM 35 2.0 TWIN is suitable for the following vehicles with the corresponding factory-built panel van rear body and original third brake light:
- Fiat Ducato from model year 2006
- Peugeot Boxer from model year 2006
- Citroën Jumper from model year 2006
- Opel Movano from autumn 2021 (new generation based on the Fiat Ducato platform)
- Toyota ProAce Max from September 2024
In the specified versions, these vehicles feature a compatible rear body design and corresponding third brake light arrangement. For motorhomes with a separate coachbuilt rear body or a different brake light mounting arrangement, compatibility must be checked individually.
Two Camera Views for Better Visibility
The CAM 35 2.0 TWIN provides two different viewing angles for different driving situations:
-
Long-distance view (90° diagonal): Allows the driver to monitor traffic behind the vehicle while driving. The camera image can be selected on the connected monitor when required.
-
Close-range view (150° diagonal): Assists the driver when reversing and manoeuvring. When correctly connected, the downward-facing camera image is automatically activated when reverse gear is engaged.
Thanks to the integrated switching electronics, both camera modules can be operated through a single video input on the monitor. Correct installation of the camera system, including the reverse gear signal, and a compatible monitor are required.
AHD and CVBS – Flexible Monitor Connectivity
The CAM 35 2.0 TWIN supports two video signal formats:
-
AHD: High-definition video transmission with a resolution of 1280 × 720 pixels for compatible AHD monitors.
-
CVBS/PAL: Conventional analogue video transmission with a resolution of 960 × 576 pixels for compatible monitors and navigation systems.
The supplied universal adapter allows connection to compatible monitors with a 6-pin camera connector or an RCA video input. The video signal format must be selected according to the technical requirements of the connected monitor.
Important: Not every monitor with a video input supports AHD. Before installation, check the supported video signal format, available connections and compatibility with the camera switching function. The video signal format is selected at the camera in accordance with the Dometic installation instructions.
Protected Camera Technology for Vehicle Use
Both camera modules use CMOS image sensors to provide good image quality even in challenging lighting conditions. With an IP69K protection rating, the camera is protected against dust and water ingress and designed for use in changing weather conditions.
Scope of Delivery
- Dometic PerfectView CAM 35 2.0 TWIN camera housing with close-range and long-distance view camera modules
- 15 m system cable
- Universal adapter for monitor connection
- Mounting hardware
- Installation and operating instructions
Note: A monitor is not included. The original third brake light is reused. Installation and electrical connection must be carried out in accordance with the Dometic installation instructions.