Dometic PerfectView CAM 35 2.0 TWIN LED – Reversing Camera with Close-Range View, Long-Distance View and LED Lighting
The Dometic PerfectView CAM 35 2.0 TWIN LED combines two camera modules and additional LED lighting in a vehicle-specific housing designed for the third brake light. While the 150° wide-angle camera covers the area immediately behind the vehicle when reversing and manoeuvring, the additional 90° long-distance view camera allows the driver to monitor traffic behind the vehicle while driving forwards. The integrated LED lighting is designed to illuminate the rear area when the vehicle is parked.
The camera housing replaces the factory-fitted surround of the third brake light. The existing original light unit is transferred to the new housing and reused, allowing the camera system to blend discreetly into the rear of the vehicle.
Compatible Vehicle Models
The Dometic PerfectView CAM 35 2.0 TWIN LED is suitable for the following vehicles with the corresponding original panel van rear body and factory-fitted third brake light:
- Fiat Ducato from model year 2006
- Peugeot Boxer from model year 2006
- Citroën Jumper from model year 2006
- Opel Movano from autumn 2021 (new generation based on the Fiat Ducato platform)
- Toyota ProAce Max from September 2024
In the specified versions, these vehicles feature a compatible rear body design and corresponding third brake light arrangement. For motorhomes with a separate coachbuilt rear body or a different brake light mounting arrangement, compatibility must be checked individually.
Two Camera Views for Better Visibility
The CAM 35 2.0 TWIN LED provides two different viewing angles for different driving situations:
-
Long-distance view (90° diagonal): Allows the driver to monitor traffic behind the vehicle while driving. The camera image can be selected on the connected monitor when required.
-
Close-range view (150° diagonal): Assists the driver when reversing and manoeuvring. When correctly connected, the downward-facing camera image is automatically activated when reverse gear is engaged.
Thanks to the integrated switching electronics, both camera modules can be operated through a single video input on the monitor. Correct installation of the camera system, including the reverse gear signal, and a compatible monitor are required.
Additional LED Lighting for Parked Vehicles
The integrated LED lighting can illuminate an area extending approximately 3 m behind the vehicle. This is particularly useful when opening the rear doors, loading or unloading luggage, or carrying out tasks immediately behind the parked vehicle in the dark.
The lighting has a separate two-wire connection for a 12 V power supply and operates independently of the camera modules.
Important safety information: The LED lighting may only be operated when the vehicle is parked and must not be switched on while driving. It is not intended to serve as an additional reversing light during vehicle operation. The electrical connection must comply with the requirements of the Dometic installation instructions.
AHD and CVBS – Flexible Monitor Connectivity
The CAM 35 2.0 TWIN LED supports two video signal formats:
-
AHD: High-definition video transmission with a resolution of 1280 × 720 pixels for compatible AHD monitors.
-
CVBS/PAL: Conventional analogue video transmission with a resolution of 960 × 576 pixels for compatible monitors and navigation systems.
The supplied universal adapter allows connection to compatible monitors with a 6-pin camera connector or an RCA video input. The video signal format must be selected according to the technical requirements of the connected monitor.
Important: Not every monitor with a video input supports AHD. Before installation, check the supported video signal format, available connections and compatibility with the camera switching function. The video signal format is selected at the camera in accordance with the Dometic installation instructions.
Protected Camera Technology for Vehicle Use
Both camera modules use CMOS image sensors to provide good image quality even in challenging lighting conditions. With an IP69K protection rating, the camera is protected against dust and water ingress and designed for use in changing weather conditions.
Scope of Delivery
- Dometic PerfectView CAM 35 2.0 TWIN LED camera housing with close-range and long-distance view camera modules and integrated LED lighting
- 15 m system cable
- Universal adapter for monitor connection
- Mounting hardware
- Installation and operating instructions
Note: A monitor is not included. The original third brake light is reused. Installation and electrical connection must be carried out in accordance with the Dometic installation instructions.