Dometic PerfectView CAM 35 2.0 REAR LED – Reversing Camera with Additional Lighting
The Dometic PerfectView CAM 35 2.0 REAR LED combines a vehicle-specific reversing camera with integrated LED lighting. Its 150° wide-angle lens covers the area immediately behind the vehicle, assisting the driver when reversing, manoeuvring and parking. The additional LED lighting is designed to illuminate the rear area when the vehicle is parked.
The camera is integrated into a vehicle-specific housing that replaces the factory-fitted surround of the third brake light. The existing original light unit is transferred to the new housing and reused, allowing the camera system to blend discreetly into the rear of the vehicle.
Compatible Vehicle Models
The Dometic PerfectView CAM 35 2.0 REAR LED is suitable for the following vehicles with the corresponding original panel van rear body and factory-fitted third brake light:
- Fiat Ducato from model year 2006
- Peugeot Boxer from model year 2006
- Citroën Jumper from model year 2006
- Opel Movano from autumn 2021 (new generation based on the Fiat Ducato platform)
- Toyota ProAce Max from September 2024
In the specified versions, these vehicles feature a compatible rear body design and corresponding third brake light arrangement. For motorhomes with a separate coachbuilt rear body or a different brake light mounting arrangement, compatibility must be checked individually.
150° Wide-Angle Camera for Safer Manoeuvring
The downward-facing camera module captures a wide area behind the vehicle. Its 150° diagonal viewing angle makes reversing easier and helps the driver identify obstacles in the immediate rear surroundings.
The light-sensitive CMOS image sensor provides a clear image even in challenging lighting conditions. With an IP69K protection rating, the camera is protected against dust and water ingress.
Additional LED Lighting for Parked Vehicles
The integrated LED lighting can illuminate an area extending approximately 3 m behind the vehicle. This is particularly useful when opening the rear doors, loading or unloading luggage, or carrying out tasks immediately behind the parked vehicle in the dark.
The lighting has a separate two-wire connection for a 12 V power supply and operates independently of the reversing camera.
Important safety information: The LED lighting may only be operated when the vehicle is parked and must not be switched on while driving. It is not intended to serve as an additional reversing light during vehicle operation. The electrical connection must comply with the requirements of the Dometic installation instructions.
AHD and CVBS – Flexible Monitor Connectivity
The CAM 35 2.0 REAR LED supports two video signal formats:
-
AHD: High-definition video transmission with a resolution of 1280 × 720 pixels for compatible AHD monitors.
-
CVBS/PAL: Conventional analogue video transmission with a resolution of 960 × 576 pixels for compatible monitors and navigation systems.
The supplied universal adapter allows connection to compatible monitors with a 6-pin camera connector or an RCA video input. The video signal format must be selected according to the technical requirements of the connected monitor.
Important: Not every monitor with a video input supports AHD. Before installation, check the supported video signal format and available connections of the existing monitor. The video signal format is selected directly at the camera in accordance with the Dometic installation instructions.
Optional Long-Distance View Camera Upgrade
The CAM 35 2.0 REAR LED is equipped with one camera module for close-range rear visibility. Drivers who also wish to monitor traffic behind the vehicle while driving forwards can upgrade the system with the separately available Dometic PerfectView CAM 35 2.0 FS long-distance view camera module.
Alternatively, the Dometic PerfectView CAM 35 2.0 TWIN LED combines close-range and long-distance view cameras in a single unit.
Scope of Delivery
- Dometic PerfectView CAM 35 2.0 REAR LED camera housing with integrated reversing camera module and LED lighting
- 15 m system cable
- Universal adapter for monitor connection
- Mounting hardware
- Installation and operating instructions
Note: A monitor is not included. The original third brake light is reused. Installation and electrical connection must be carried out in accordance with the Dometic installation instructions.