Dometic PerfectView CAM 80 AHDN – Reversing camera with AHD and CVBS video signals
The Dometic PerfectView CAM 80 AHDN is a modern reversing camera for motorhomes, campervans, caravans and other suitable vehicles. It assists the driver when reversing, manoeuvring and parking by displaying the area behind the vehicle on a compatible monitor.
As a technical advancement of the PerfectView CAM 80CM, it combines a motorised protective shutter, infrared night vision and an integrated microphone with the ability to switch between high-definition AHD and analogue CVBS video transmission.
AHD and CVBS – Two video signal formats for different monitor systems
The CAM 80 AHDN supports two switchable video signal formats:
-
AHD (Analog High Definition): High-definition video transmission for compatible Dometic AHD monitors.
-
CVBS: Analogue video transmission for monitors that support the CVBS video signal.
The video signal is selected using a trigger loop on the camera connection cable. When the trigger loop is closed, the camera outputs the CVBS signal. When the trigger loop is open, the camera outputs the AHD signal.
Important: The selected video signal, electrical connections and any required control functions must be compatible with the monitor system used.
Motorised protective shutter, infrared night vision and microphone
The motorised protective shutter protects the camera lens from dust, dirt and external influences when not in use. When the camera is activated, the shutter opens automatically to provide a view of the area behind the vehicle.
Integrated infrared LEDs with a motorised IR-cut filter support image reproduction in darkness and low ambient light. A temperature-controlled heater supports operation at low outdoor temperatures.
The integrated microphone enables ambient sounds to be transmitted to a suitable monitor system. This can be particularly helpful when another person is guiding the driver during manoeuvring.
Technical advancement and replacement of the CAM 80CM
The PerfectView CAM 80 AHDN represents a technical advancement over the previous CAM 80CM. While the CAM 80CM outputs only an analogue PAL video signal, the CAM 80 AHDN additionally supports higher-resolution AHD video transmission.
The camera connections of both models are identical. Existing suitable system wiring can therefore be reused when replacing the camera, provided it is in good technical condition and the electrical connection requirements are met.
When using a suitable analogue PAL monitor, the CAM 80 AHDN is operated in CVBS mode. A compatible Dometic AHD monitor is required for high-definition AHD video transmission.
Please note: Before replacing a camera, the supported video signal formats and the electrical connection requirements of the existing monitor must be checked.
Installation and alignment at the rear of the vehicle
The camera is mounted in a suitable position at the rear of the vehicle. Secure mounting, a clear view of the area behind the vehicle wherever possible and correct camera alignment must be ensured.
The required installation steps, electrical connections and video signal settings are described in the Dometic installation and operating manual.
Scope of delivery
The Dometic PerfectView CAM 80 AHDN includes:
- 1 Dometic PerfectView CAM 80 AHDN reversing camera in silver with motorised protective shutter
- 2 camera brackets
- M3 and M5 screw sets and 5 mm self-tapping screws
- 1 system cable, 20 m
- 2 side covers
- 1 connection seal
- 2 screw covers
- 1 trigger loop for selecting the video signal format
- Installation and operating manual
Important: A reversing monitor is not included.
Safety information: The reversing camera is an auxiliary visibility aid. Technical limitations and blind spots may remain. It does not replace direct observation of the vehicle surroundings or the driver's attention and responsibility.