Dometic PerfectView CAM 80CM – PAL reversing camera without system cable
The Dometic PerfectView CAM 80CM is a compact silver reversing camera for motorhomes, campervans, caravans and other suitable vehicles. It assists the driver when reversing, manoeuvring and parking by displaying the area behind the vehicle on a compatible monitor.
A distinctive feature is its motorised protective shutter, which helps protect the camera lens from dust, dirt and external influences when the camera is not in use. Its compact design also makes the camera suitable for vehicles with limited installation space.
This version is supplied without a system cable. It is particularly suitable for replacing an existing CAM 80CM when a compatible system cable is already installed in the vehicle and can be reused.
145° wide-angle view for extensive rear visibility
The CAM 80CM features a wide-angle lens with a diagonal viewing angle of approximately 145°. This allows a large area behind the vehicle to be captured, which is particularly useful when manoeuvring and parking.
The integrated 1/3-inch CCD image sensor provides an analogue PAL video signal. The camera has an adjustable mirror-image function, allowing the image orientation to be adapted to the intended application.
Important: The actual visible area depends on the mounting position, camera alignment and vehicle geometry. Blind spots may remain despite the wide viewing angle.
Motorised protective shutter for the camera lens
The CAM 80CM is equipped with a motorised shutter that protects the camera lens when it is not in use. When the camera is activated, the shutter opens to allow a view of the area behind the vehicle.
The shutter helps protect the camera window from contamination caused by dust and spray water. This is particularly beneficial for vehicles used regularly on long journeys or in changing weather conditions.
Infrared night vision, microphone and temperature-controlled heater
Integrated infrared LEDs support camera operation in darkness and improve visibility of the area behind the vehicle in low ambient light.
The built-in microphone enables ambient sounds to be transmitted to a suitable monitor system. This can be particularly helpful when another person is providing guidance from behind the vehicle during manoeuvring.
A temperature-controlled heater supports operation in low outdoor temperatures. The weather-resistant camera housing has an IP68 protection rating and is designed for installation at the rear of a vehicle.
Ideal as a replacement camera for existing CAM 80CM systems
This version of the PerfectView CAM 80CM is particularly intended for users who wish to replace an existing camera without having to renew the wiring already installed in the vehicle.
If a suitable Dometic system cable is available and in good technical condition, it can be reused when replacing the camera. This can reduce the installation work compared with a completely new installation.
The camera operates with the analogue PAL video signal. Before ordering, both the existing connectors and the monitor system's support for the PAL video signal must therefore be checked.
Important note: A system cable is not included. For a new installation, a suitable system cable must already be available or purchased separately.
Connection and compatibility with reversing camera systems
The Dometic PerfectView CAM 80CM is designed for connection to suitable reversing monitors or compatible Dometic reversing camera systems.
The camera has a 6-pin connection. The existing wiring must match the camera in terms of connector type, electrical pin assignment and technical specifications.
Please note: The CAM 80CM is not an AHD camera. It is not suitable for monitor systems that can process only an AHD video signal.
CAM 80 AHDN – Technical advancement
The Dometic PerfectView CAM 80 AHDN represents a technical advancement over the CAM 80CM PAL. The newer camera supports both the analogue CVBS video signal and AHD (Analog High Definition), providing additional options when selecting a suitable monitor system.
The connections of the CAM 80CM and CAM 80 AHDN are identical. When replacing a camera, it is nevertheless necessary to check which video signal the existing monitor supports. For suitable older analogue monitors, the CAM 80 AHDN must be set to CVBS.
The CAM 80CM remains particularly relevant for users wishing to continue using a camera with the existing PAL video system. For new installations or upgrades to a higher image resolution, the CAM 80 AHDN may be a suitable alternative.
Installation and alignment at the rear of the vehicle
The CAM 80CM is mounted at a suitable position at the rear of the vehicle. The mounting location must allow secure attachment and provide an unobstructed view of the area behind the vehicle wherever possible.
When replacing a camera, the existing mounting points, camera alignment and condition of the installed system cable and its connectors must be checked.
The required installation steps, electrical connections and camera alignment are described in the Dometic installation and operating manual.
Scope of delivery
The Dometic PerfectView CAM 80CM PAL without system cable includes:
- 1 Dometic PerfectView CAM 80CM reversing camera in silver with motorised protective shutter
- Mounting materials
- Installation and operating manual
Important: A system cable and reversing monitor are not included. Compatibility with the existing wiring and intended monitor system must be checked before ordering.
Safety information: The reversing camera is an auxiliary visibility aid. Technical limitations and blind spots may remain. It does not replace direct observation of the vehicle surroundings or the driver's attention and responsibility.