Dometic PerfectView CAM 29S – Compact Reversing Camera with 20 m System Cable
The Dometic PerfectView CAM 29S is a compact reversing camera designed for external installation on campervans, motorhomes, caravans and other suitable vehicles. Its low-profile design and black housing allow discreet integration at the rear of the vehicle. It assists the driver when reversing, manoeuvring and parking by displaying the area behind the vehicle on a compatible monitor.
This version of the CAM 29S is supplied with a 20 m connection cable. It is therefore suitable both for installing a new compatible reversing camera system and for replacing an existing camera, provided that the technical connection requirements are met.
160° Wide Angle for a Broad Rear View
The CAM 29S wide-angle lens has a diagonal viewing angle of 160°. The horizontal viewing angle is approximately 130°, while the vertical viewing angle is approximately 100°. This allows a large area behind the vehicle to be covered.
The integrated 1/4-inch CMOS image sensor provides an image resolution of 640 × 480 pixels. The camera features a preset mirror-image function, allowing the area behind the vehicle to be displayed in a format suitable for reversing applications.
Important: The actual visible area depends on the mounting position, camera alignment and vehicle geometry. Areas outside the camera's field of view may remain despite the wide viewing angle.
Compact Design for Campervans and Motorhomes
Measuring just 76 × 29 × 33 mm and weighing approximately 80 g, the CAM 29S can be installed at the rear of the vehicle without taking up much space. Its compact design is particularly suitable for vehicles where an unobtrusive camera installation is preferred.
For use as a reversing camera, Dometic recommends installation in the upper central area of the vehicle's rear. The mounting location must be sufficiently stable to ensure secure attachment.
After installation, the camera is aligned using the monitor image. Care should be taken to ensure that the displayed image is level.
Weather-Resistant Camera Housing
The CAM 29S is designed for external installation on vehicles. Its housing provides protection against the ingress of dust and water corresponding to protection rating IP68.
The camera is designed for operating temperatures from −20 °C to +70 °C, making it suitable for use in different climatic conditions.
Care instructions: Do not clean the camera directly with a high-pressure water jet. Do not open the housing or pull on the camera cable, as this may compromise the watertight seal.
Connection to Compatible Reversing Monitors
The CAM 29S is connected to a suitable reversing monitor using the included, ready-to-connect 20 m connection cable. The camera has a 6-pin Mini-DIN connector; the connection to the monitor is made via the 6-pin plug on the connection cable.
Please note: Before ordering, check that the intended monitor or existing reversing camera system meets the necessary electrical and mechanical connection requirements. A matching 6-pin connector alone does not guarantee universal compatibility with all monitor systems.
The camera operates at 12 V DC with a current consumption of 60 mA. Electrical connections must be made in accordance with the Dometic installation and operating manual.
Installation and Cable Routing
When installing the camera, select a suitable mounting location with a clear view behind the vehicle and ensure that the connection cable can be routed safely and securely.
Where possible, the cable should be routed inside the vehicle. Any cable openings through the bodywork must be sealed against water ingress. Plug connections must be protected against moisture and mechanical strain.
The necessary installation steps, camera alignment and electrical connections are described in the Dometic installation and operating manual.
Scope of Delivery
The Dometic PerfectView CAM 29S (manufacturer part number 9600000199) is supplied with:
- 1 Dometic PerfectView CAM 29S reversing camera in black
- 1 connection cable, 20 m
- Mounting materials
- Installation and operating manual
Note: A reversing monitor is not included. Compatibility with the intended monitor system must be checked before ordering.
Difference compared with the version without system cable: The CAM 29S is also available as a separate camera unit without the 20 m connection cable (manufacturer part number 9600024660). This version is particularly suitable for replacing an existing camera where compatible cabling is already installed.
Safety information: The reversing camera is an auxiliary visibility aid. It does not replace direct observation of the vehicle surroundings or the driver's attention and care.